These 304 stainless steel V-band clamps are designed for clamping exhaust components together.

These V-band clamps and rings are numbered based on the inner diameter of the pipe. Confused? just look at the Actual Clamping Ability below.

Designed as a replacement for old or inferior clamps, they include only what is shown, not the rings (also known as pipe ends).

Unlike some other V-band clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM).

V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to install and swap your exhaust parts easily while maintaining the sturdiness and leak-proofing of a welded exhaust.

2.000" / Actual clamping ability is 2.48" to 2.80"

2.500" / Actual clamping ability is 2.99" to 3.31"

3.000" / Actual clamping ability is 3.50" to 3.82"

3.500" / Actual clamping ability is 4.02" to 4.33"

4.000" / Actual clamping ability is 4.52" to 4.83"

 V-Band clamping ability refers to the outer diameter of the ring of the V-band clamp ring. The low number here can be 0.01" to 0.05" lower than the actual outer diameter of the V-Band clamp ring you are clamping. These match the sizes on our V-band clamp rings perfectly.

Hablamos Espanol.

Customer Service 1-856-213-6351  /  7:00am to 5:00pm  Monday to Friday Eastern Time

After Hours  1-856-297-8234  /  5:00pm to 8:00pm  Monday to Friday Eastern Time